Bathtek Baywood 850L Steam Shower Cabin

The Baywood 850 is a popular elongated styled steam shower cabin. This cubile has all the features you could want in a steam shower cabin - huge 10" monsoon rain top shower, hand shower and riser, back jets and of course powerful 3kw steam generator. The unit has roof light, and interior and exterior LED lights too. The back inside walls of the cabin are smoked mirror glass and create a truly luxury feel against the crisp white base bonded to a steel frame. The side walls and doors are clear glass. The cabin comes with a remote control to enable to you to control some functions of the cabin without enven getting inside!


(Also available in Right handed option)





Size: 1300mm x 850mm x 2250mm

• Remote Control


• Electronic steam time & temperature control


• Thermostatic Shower Valve


• 25cm Tropical Monsoon Top Shower


• 6 Hydro massage body jets


• Multi function hand shower


• Foot massage attachment


• Built-in FM radio with cd/mp3 input


• Pop up waste


• Extractor Fan


• Toiletries Shelf


• Low voltage ceiling lighting


• LED back lighting


• Built in seat


• Requires between 1-3 bar of water pressure.


• Ozone Sterilization (o3)


• 3kw Steam generator

Installation Notes:

Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position. Please also read our helpful FAQ section.

For more information and to order: http://www.bathtek.com/

Bathtek Pembrook Twin Steam Shower & Whirlpool

It does not come much more impressive than the Bathtek Pembrook TV. A Steam Shower Cabin designed for two to share, Twin back jets and room in the Whirlpool for two, or just sit and enjoy the swirling soothing whirlpool as you watch the integrated TV. The Pembrook can also be connected to alternative video sources such as DVD, Freeview, inputs if you wish. The Bathtek Pembrook also has built in telephone features to allow making and receiving calls without stepping out of the cabin. So whether you’re looking for a Steam Shower cabin with space for two or the idea of an impressive feature piece is in mind, the Bathtek Pembrook TV is the one!

NOW AVAILABLE with Clear Glass!

• 6 large jet & 4 back jet Whirlpool System
• Twin Headrests and twin seats
• Remote Control
• 3kw Steam generator
• Electronic steam time & temperature control
• Thermostatic Shower Valve
• 10” Tropical Monsoon Top Shower
• 2 bays of 6 Hydro massage body jets
• Multi function hand shower
• Foot massage attachment
• Built-in FM radio with cd/mp3 input
• LCD TV with DVD/VCR connectivity
• Telephone answer function
• Extractor Fan
• Toiletries Shelf
• Low voltage ceiling lighting
• Blue LED back lighting
• Built in seat
• Ozone Sterilization (o3)

For more information on the Bathtek 9011 Steam Shower, click here

Your Delivery: Your order will be supplied on a Pallate and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle.

Installation Notes:Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.This product arrives in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.

http://www.bathtek.com/steam_shower_cabins.htm